News Center

current position: Home > News Center > Packaging news

Talk about the maintenance of pillow packaging machine 5 items

2022-02-09 10:22:50

Pillow packing machine maintenance instructions:

1, the packaging machine should be placed in a dry and clean room for use, shall not be placed in the atmospheric circulation site containing acid and other corrosive gases.

2. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the appropriate position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not ring, turn the belt pulley by hand, properly tight properly, too tight or too loose may cause damage to the machine.

3. After the steel tube packaging machine is used or stopped, the rotating drum should be removed, the remaining powder in the barrel should be cleaned and brushed, and then properly packed to prepare for the next use of the steel wire ball packaging machine.

4, regular inspection of steel wire ball packaging machine parts, once a month, check whether the worm gear, worm, lubricating block bolts, bearings and other moving parts are flexible rotation and wear, found defects should be repaired in time, not forced use.

5. If it is not used for a long time, the whole body of the profile metal packaging machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and then covered with a rag.




Recently Viewed:

Related products



       Address: No.9 Junye North Road, Zone C, Shishan Science and Technology Industrial Park, Shishan Town, Nanhai District, Foshan city, Guangdong Province

Telephone: 0757-81263868

Miss Liang 18902412083, same wechat number

Fax: 0757-81263869


© Copyright:Foshan Ruipu Machinery Equipment Co., LTD 粤ICP备15013582号
Technical Support: Up to the science and technology